The X100F is the fourth iteration of Fujifilm’s well-respected X100 series. It still uses the same 35mm equivalent 23mm F2 lens, still has the ‘classic’ design cues, but almost everything has changed under the surface.
- New Firmware Ver.2.00
- X-Trans™* CMOS III & X Processor Pro
- Advanced Hybrid Viewfinder
- Intuitive Analog Operation
- Focus Lever for Quick Selection of Focus Areas
- Film Simulation “ACROS”
- Digital Teleconverter
- 3.0-inch LCD screen (1040K-dot)
- ISO 51200*2
- Single Focal Length Lens(23mm·F2)
The FUJIFILM X100F signifies the achievement of new heights in Fujifilm’s endless pursuit of perfection in photography. Perfection means creating a system that allows photographers to control, frame, and create with style, ease, and purpose. A long-anticipated iteration of the X100 series, the FUJIFILM X100F is a powerful addition to FUJIFILM X Series, offering photographers the versatility of endless creativity.
New Firmware Ver.2.00
Installing this firmware update will add new support for the “FUJIFILM X RAW STUDIO” software which allows the user to connect the camera to a computer via USB cable for developing raw files in camera. The new firmware will also improve third party studio flash controller usability.
New features in the FUJIFILM X100F include the Built-In ISO Dial, incorporated into the Shutter Speed Dial reminiscent of film cameras of yesteryear, the focus lever, which allows you to instantaneously move the focus area without having to take your eye off the viewfinder, and the “C” position for enabling ±5 stop exposure compensation. Most of the operation-related buttons and dials are concentrated on the right-hand side to allow quick change of settings while firmly holding the camera.
You can now change the magnification of the electronic rangefinder, shown in a small window as EVF at the bottom right corner of the optical viewfinder, for enhanced accuracy when checking the focus. The Real Time Parallax*** Correction function is applied to the focus area in addition to the guide frame to enable assured framing and focusing in the Manual Focus mode.
The Film Simulation function now features the ACROS mode. Using X-Processor Pro’s advanced processing capability, the mode offers smooth gradation, deep blacks and beautiful textures to create monochrome images that far outperform the previous Monochrome mode.
The FUJIFILM X100F features the 24.3MP X-Trans CMOS III, an APS-C sensor with no low-pass filter boasting the highest performance in the history of the X Series, as well as the X-Processor Pro high-speed image processing engine to deliver outstanding color reproduction and gradation of tones in both stills and videos with high ISO sensitivity and low noise.
The FUJIFILM X100F’s lens has a built-in ND filter, which is useful when shooting with the aperture wide open in bright light, or when opting to use a slow shutter speed. The three-stop ND filter, which cuts down the amount of light to 1/8, can be activated easily with the function button or from the camera menu.
New conversion lenses are optically designed to draw out the maximum performance of FUJIFILM X100F’s built-in lens, delivering premium picture quality without having to change the F stop value. The camera body automatically recognizes it when a conversion lens is mounted, and displays a guide frame indicating the shooting area when in the OVF mode.
Nam pretium, sem iaculis ullamcorper mattis, sem lacus commodo dui, vel ultrices libero nisl et massa. Sed tristique bibendum arcu, dapibus eleifend justo aliquet eu. Fusce sed blandit lorem. Phasellus blandit posuere nulla quis aliquam. In vel ante vitae neque aliquet hendrerit a non velit.
X-Trans is a trademark or registered trademark of FUJIFILM Corporation.
Extended output sensitivity.
The gap between the shooting range frame and actual shooting range when shooting close up.
The Fujifilm X100F is the fourth iteration of the company’s premium compact camera, and promises to be its best yet.